RH nose, air dam, almost ready

My goal for the day was to duplicate on the right side what I had done on the left, namely bring the repairs to a close and put down a coat of real paint to block moisture as I continue working elsewhere. This does not mean the area is finished and ready for paint. More like ready to start wet sanding as prep for paint.

Well, I didn't get that far. There are some tricky spots remaining. Most notably a deep groove along the joint between the panel beneath the grill opening and the air dam, caused by a fiberglass patch. In the close-up pic it is below the black fiberglass patch in the center of the pic. I got as far as being ready to apply filler but was out of time. Hopefully I'll do that during the week.

posted from Bloggeroid

Spotting putty, upper grill opening flange

I went back to the NAPA paint center in Pearl City to pick up some wet/dry sandpaper and some spotting putty. Good news, one of the guys from the old Redline in Kalihi was working. Maybe things will work out after all. The bad news: out of anything near #100. The shop is much too small.

I am back to my short Saturday morning schedule. I really need to take some time off to make any progress. I think the Navy Seals were on the ground in Pakistan longer than I worked on the E9.

There is a series of small rust-through spots on the upper edge of both grill openings. More so on the LH side. I patched the LH side with fiberglass and POR Patch. This time I covered the metal with POR Patch and laid down the cloth, then stopped. Next time I'll saturate the cloth, maybe with POR paint. My goal is to avoid pulling the cloth out of position, especially pushing it through the holes.

Tried out the spotting putty on several places, worked well. Also bought a new can of primer, had the same aligator skin result. Could be incompatible with POR-15 Etching Primer. Next time I'll wipe the area with PPG thinner before spraying to see if that helps.

Spent more time on the LH lower front, just above the air dam. Almost there, finally.

posted from Bloggeroid