Hey, That Looks Good

Lots to report here and I apologize if it sounds confusing. Today was the Honolulu Century Ride, by far Hawaii's biggest cycling event. My wife Pattie and I did 50 miles, which was plenty enough for me. I try to ride to work every day, but this year my life has become too complicated and average between three and four days a week. That's enough to be healthy, but not enough to develop the endurance necessary for long rides. Needless to say, nothing was done on the E9 today.

Not working on the car had one positive side effect -- I got to watch Sunday Night Football. The Bears beat the Eagles. In Hawaii the game aired at 2:15. Normally I'm at the shop at that time. I do get to watch Monday Night, because that game is delayed until 6:30. The thing is, I can't stand the ESPN announcers. Al Michaels and John Madden are by far the best football commentators in the business. The ESPN style is for the announcers to argue amongst themselves, and none of them are capable of providing the on-the-spot play analysis that Madden does so well.

Last Sunday I did get to work on the car and it was another milestone kind of day. The sort of day that leaves me feeling as though this project might actually turn out well.

The day consisted mostly of sanding down the second layer of POR-15 Epoxy Filler. I put fresh #40 paper in both of my sanding blocks and spent several hours painstakingly working down all those lumpy spots.

The first series of photos shows how it looked after all that sanding. The second set shows how it looked after spraying with primer. I left the edges alone; they still need to be rounded.







Once again I forgot my tripod and had to use the on- camera flash, and that tends to flatten the image. I found it really hard to get a clear photo that shows what it looks like.

By the way, the milestone was the first application of primer on the path leading to the finish paint. Maybe that sounds silly but it seemed important to me.

Window sill takes shape

It was another scorcher today. I have not seen the numbers, but was hot in my bay, so hot I had to ask myself why I keep doing this when there must be more pleasurable ways to spend a Sunday.

Today was all about sculpting. I did most of the work with the shorter of my two sanding blocks, loaded with 40 grit paper. I did use my grinder on the upper and lower faces, but I did not want to risk it on the middle face, the one that will be visible. The course paper cut the POR-15 Epoxy Filler with ease, the perfect balance between speed and caution.

This series of photos tries to show how it looked after an hour. The small, on-camera flash tends to obliterate textural details, so I tried shooting from various angles. Maybe next week I'll remember to take a tripod so I can shoot without flash.





These last two photos show the second application of filler. Hopefully that should do it.

Ready for sculpting

Today was another great day. Hot, too. Maybe I feel like I accomplish more when I bake in the afternoon heat. Maybe what I am measuring is suffering. Or sweat production.

Today I decided to take the Lotus. Usually I take my big old Dodge Carvan, which is full of stuff I can't leave at the shop, like paints and lubricants. Today I would't need any of that, so I took the opportunity to enjoy the Lotus.



The day started with an inspection of last week's welds. I spotted several places where the bond at the bottom was unconvincing, so I started there. While I was doing that I ran a little bead along each of the three joints, to prevent them from flexing relative to each other. Next I ground down everything -- I could leave a lot because the epoxy filler will cover it -- and pushed hard against each segment, to check the top weld. I found four in a row near the center than had not stuck. A little more welding, testing, more welding, until finally everything was solid.





While I did the last pass of grinding I ran the wheel over the bare metal to give the filler a rough surface to hold onto. On when the latex gloves and on went the POR-15 epoxy filler. I always cut each part about 1/8 in. thick, because that makes a batch just the right size to put on before it starts to kick off. I went through maybe half a dozen of these batches.

I pushed hard to force the filler into the cracks and gaps, my thinking being that this stuff is somewhat structural and will help tie all the little pieces together. If the pieces move relative to each other the finish coat will crack.

When I had all the new parts done I still had some time left, so I filled in the places I had left uncovered on the first (left-most) patch. Next week I can get right to work shaping the entire piece.



On my way home I stopped for gas. The Lotus fuel gage was reading beyond full, which meant it was getting low. When I made new tanks the sending unit ended up wired backwards, and physically the float cannot swing all the way up or down, so the gage reads empty when the tank is 7/8 full and full when it's 7/8 empty. The gage sits right in front of the passenger, and makes for interesting conversation. Anyway, to fill up cost $40. That's right. Slightly less than nine gallons, $40. Well, it is a Lotus. It's worth it.

Then came the embarrassment of the engine not starting. It never cranks enthusiastically, especially when it's hot. This was one of those times. Then it stopped cranking altogether. What happened next is why I buy my gas at Kahala Shell and not Costco or 7-11. One of the attendants brought out a jumper battery -- without my asking! -- and helped me get it going. No charge. I really do have to replace that lousy positive cable. Hats off to Kahala Shell.

Finally Got It On

Today I finally got the last two rear window sill patches welded into place. Break out an extra ration of rum, I say! Huzzah!

These two patches were much easier to fit because the sill curves less in the center. I had to run the bottom edge of both through the stretcher one more time. Then, like the first two, I tweaked the upper tabs up here and there to get the best possible fit.

After all the tweaking the weld-thru primer I had previously applied was a bit dinged up, so I shot both pieces again. I also ground off the POR-15 in the places where the welds would go. And I drilled holes through the upper sill to facilitate welding.

The third patch went on easily, because I could hold it in place with vise-grips. The last one posed an extra challenge because there was no space for the vice-grips. To hold it in place I tack welded a thin steel rod at each end. My friend Tom held it in place while I welded.

I just got the last piece welded on when it was quitting time, so grinding and filling will have to wait. All in all it was a good day.

One thing I noticed about today was the heat. It was especially noticable when I was welding, when I wear a heavy long-sleeved shirt, thick gloves, and of course the helmet. Turns out it was 90 degrees in Honolulu today, which is as hot as it gets. My bay faces West and today I could have baked cookies on the E9's hat rack.

Another Patch Welded On

I was hoping to pick up the pace by welding on the next three patches as a group. That is why I had previously painted all three with Weld-Thru Primer. Last week ended in a lesson about what happens when the desire to finish gets too strong. The patch for the right side still did not fit right, and instead of taking the time to tweak it the way I had the left side, I thought I could force it into position and let the welds hold it in place. The tack welds failed, and that was when I realized I needed to slow down and do what needs to be done. In my defense, it is not always obvious what the right thing to do is when you are learning as you go without a teacher. The trick to learning from your experience is to recognize and make use of learning opportunities.

In his book "Positive Coaching" Jim Thompson descibes a similer situation, which he calls a coachable moment. In sports, there are times a player can receive instruction and times they can't. There is no point in trying to explain some fine point of the game when the athlete is not in learning mode. As a rule, game time is not learning time. Even during practice there are surprisingly few coachable moments. This is why so many coaches complain that their players don't listen, that what goes in one ear goes out the other. What makes a successful coach is the ability to spot those coachable moments and make the most of them.

My point is that when I get all spun up working on the car the effect is the same as being "in the game." If I am doing something familiar I can charge along without worry. It's when I am doing something unfamiliar that I need to resist the temptation to put on my game face, because that is when things are more likely to turn out badly.

As I was tweaking the right hand patch I ran into a problem getting the top edge of the patch to fit tight againt the opening. The problem turned out to be the original seam, which is about 1/2 in. back. I did not want to grind it flush because that could weaken that joint, which could make my patch fail in the future. At the same time I did not want to rely on spanning the gap with the welder. I decided to drill a series of holes through the sill, one per tab, on or near the seam line, and to weld through those.

This plan almost worked. For some reason the outboard end ended up with a little more gap than I had expected. The only explenation I have to offer is that I relaxed my grip on the rod lifting the piece into place before the weld puddle fully hardened. I ended up trying to fill in the gaps around the holes and along the edge. The result looks messy but it should have enough strength. I did not apply putty because I think I need more welds along the bottom.

One last item. Previously I mentioned getting a welding blanket to prevent setting things on fire. For this session I did a lot of welding, and when I was finished it looked as if a bunch of oily rust flakes had been dislodged by all the grinding. It turns out the spots on the blanket were burn marks. I even burned a hole in my pants. Anyone contemplating welding on a car should consider a welding blanket mandatory equipment.

Second patch after initial weld.



Another view showing welds through holes in window sill. Inboard hole (net to vise-grips) not filled in yet.



After filling in more of the gap along the top edge.



After a little grinding. I think I need some more welds along the bottom edge.

Too hard too fast

Another short note about a busy day. Today I finished cutting notches in the last patch and painted the underside of all three with 3M Weld-Thru Primer. I decided to do the hard part first, the farthest to the right. As I set up to weld I realized that the curvature of the patch still did not quite match the opening, but I thought I could pull it into place. I tacked it into place at the outboard end and used a small vice-grips plier to hold the inboard end in position. Just when I got it right the tack welds broke. I'll have to try again next week.

Three finished patches, bottom view -- the solid edge will be vertical, on the bottom.



Flipped around 180 deg. so you are looking at the top with left-right reversed.



Underside painted with 3M Weld-Thru Primer

Preping More Patches

Just a short note to say I spent the day working on the remaining three patches for the rear window sill. Lots of cutting and filing. I was hoping to get all three done and painted with weld-thru primer but time ran out.



My experiment with welding POR-15 has caused me to change plans. For these three patches I will use 3M 051131-05917 Weld-Thru II primer. The label on the aerosol can reads "A Weldable, Corrosion Resistant Coating." The good news is that drying time is rated at 5-10 minutes, so I can paint and weld next week, all on the same day. The bad news comes in two parts. First, the can recommends applying 3-4 coats of the same paintover, followed by a layer of Rust-Fighter I. Or, as a second option, remove all traces of Weld-Thru II prior to applying plastic filler. Neither choice is an option in this case, because the back side of the patch ends up in an enclosed box section.

During the week I picked up a fire-proof blanket from GASPRO, because last week while welding in the trunk area I set two rags on fire. I hope I don't get a chance to see how well it works.